Micromax a093 восстановление кирпича - Домашний мастер MoyDom-irk.ru
2 просмотров
Рейтинг статьи
1 звезда2 звезды3 звезды4 звезды5 звезд
Загрузка...

Micromax a093 восстановление кирпича

How to Boot Into Micromax A093 Canvas Fire Recovery Mode

Micromax A093 Canvas Fire Recovery Mode

A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.

The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.

There are multiple methods to boot your Micromax A093 Canvas Fire in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Micromax A093 Canvas Fire. Others are software based, let’s have a look them below:

1) Boot into Micromax A093 Canvas Fire Recovery Mode Using HARDWARE BUTTONS

This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.

  1. Power off your device and wait 4-5 seconds after lights go off.
  2. Press and hold Power + Volume UP buttons together for a few seconds and then release the buttons as soon as you see the Android logo with an exclamation mark on your phone’s screen. You’ll be booted into recovery mode.
    └ In recovery, use Volume Up and Down keys to navigate between options and Power key to select an option.

[ad1]

2) Boot into Micromax A093 Canvas Fire Recovery Mode Using ADB

ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.

First off, DOWNLOAD ADB FILES →

And make sure you’ve proper drivers installed for your device. You can download driver from this page →

  • Extract the file (ADB files.zip) you downloaded from the link above to a separate folder on your computer
  • Prepare your phone
    • Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
    • Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
  • Connect your phone to PC with a USB cable and if/when a pop-up screen shows up on Phone asking you to ‘Allow USB debugging?‘ for the computer, make sure you tick the checkbox and tap OK
  • Open the folder where you extracted the files and double-click/run the ‘Boot into Recovery Mode.bat‘ file to reboot your device into recovery mode
    └ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →

FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:

If you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.

3) Boot into Micromax A093 Canvas Fire Recovery Mode Using Quick Boot (Reboot) APP

Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.

ROOT ACCESS REQUIRED

  • Install the Quick Boot (Reboot) app from Play Store on your Micromax A093 Canvas Fire | Play store link →
  • Open the app and grant Root Access
  • Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode

Let us know in the comments below if you need any other help, we’d be happy to help.

Shivam

Shivam is our resident designer and web developer who also enjoys writing. He loves to meditate, drive on the freeways and hunt for snipers during his Call Of Duty playtime. Email: [email protected]

Micromax A093 Hard reset, Factory Reset and Password Recovery

Micromax A093 Hard Reset. You can easily unlock your android mobile phone for free. You do not need any software knowledge. Here we are also provide password recovery with android tools & drivers and With your Google account etc. Please note that Hard reset delete all your data from your mobile. You will not recover your data like apps, contacts and Files etc.

What is Hard Reset ?

Hard reset, also known as a factory data reset or master reset, is the restoration (Format) of a device to the state it was in when it left the factory. All settings, applications (Apps) and data added by the user are removed means permanently deleted.

Читать еще:  Шамотный кирпич с сухого лога

Search Keywords :

Micromax A093 hard reset code. Micromax A093 hang on logo solution. Micromax A093 flash file. Micromax A093 privacy protection password. Micromax A093 hard reset key. Micromax A093 password reset. Micromax A093 factory reset. How to hard reset Micromax A093.

Important Things to Know Before Hard Reset :-

You must read following article before hard reset or factory reset any mobile phone. If you not follow below post, You will lose some valuable data in your mobile phone. These important points will help you to reset your android or windows mobile without any error.

Table of Contents

Micromax A093 Hard Reset :-

Micromax A093 Hard reset method. Hard reset Delete all your data like photos, contacts and applications (Apps) in your android mobile. You will not recover your files after reset your mobile. So try to recover your password first. If you can not recover your PIN or Password, then follow this method.

  1. Switch off or Turn off your phone.
  2. Then, Press and Hold
    1. Volume Up + Power button (or)
    2. Home button + Volume Up + Power button(or)
    3. Volume Down + Power button (or)
    4. Volume Up + Volume Down + Power button
  3. Please try above all steps one by one, Until you will see Android reboot menu.
  4. Next, select option : “wipe data / factory reset” using Volume Down, and Power button to confirm operation.
  5. After that, choose option “yes” with Volume Down, to select and Power button to accept.
  6. Finally, press Power button to enter option “ reboot system now ”.
  7. Finally, Hard reset done on your mobile.

Micromax A093 factory Reset :-

You can make your settings to factory defaults. factory reset will erase all your data. To perform a mobile factory data reset using the Settings menu, follow Below Simple steps:

  1. First , Open the Settings menu, On your mobile device.
  2. Then, Under “ Personal ” touch Backup & reset Option. You need to enter your PIN, pattern, or password.
  3. If you can not see Backup & Reset, try to find Reset option in your settings.
  4. Next, Under “Personal data,” touch Factory data reset.
  5. Next read the information on the screen and touch Reset phone option.
  6. If you have a screen lock, you will need to enter your PIN, pattern, or password.
  7. Then after, When prompted, touch Erase everything Option to erase or delete all data from your mobile device’s internal storage.
  8. Finally, When your device has finished formatting, select the option to reboot your device.
  9. Factory reset done on your mobile.

Micromax A093 Password Recovery With Android Tools:-

This is Best method to recover your mobile password. This method is Easy to Hard reset or recover your mobile password or PIN. This method is only works on android mobiles only. First you need a basic knowledge about computer and software installation. Follow below steps to reset your phone.

  • First, D ownload Android tools and drivers to your computer from below link.
  • After that, install Drivers manually to your computer or PC.
  • Software create a shortcut icon on your PC desktop.
  • Click on that shortcut icon.
  • If drivers will not create any shortcut, Open Android_Tool_Drivers / Android Multi tool / Android Multi Tools v1.02b gsmforum file from your downloaded file .
  • Next, you see pop-up on your computer. Click on run option.
  • Finally, you see the Android tools and drivers command prompt.

Do below steps on your android mobile :

  • Press and Hold
  1. Volume down button + Power button or
  2. Volume up button + Power button or
  3. Volume down + Volume up + Power button For a while.
  • Please try above all steps one by one, Until you will see Android reboot menu.
  • After you see Android boot mode on your smart phone.
  • Now connect your android mobile to your computer via usb (Universal Serial Bus).

  • Now you need to type any number to perform Hard reset or password recovery.
  • Type 2 for reset face, type 4 for reset Gmail, type 5 for wipe data.
  • No data will be delete if you choose 2, 3, 4 Options.
  • Above options clearly explained below.
  • Option 2 : You can reset your face or PIN lock. No data will be deleted.
  • Option 4 : you can reset your gmail account. Means your old Mail deleted then new mail added to your mobile.
  • Option 5 : Wipe all your data on your mobile. Means all data will be deleted.
  • Option 8 : If you see fast boot mode on your mobile phone when you press volume buttons, You need to enter number 8 to wipe all your data.
  • Type any number that you want then press enter.
  • Reset done on your android mobile phone.

Micromax A093 Reset Codes :-

1122 1234 0000 *#8929# *#67638#

*#06# *#8375# *#6629# *#18375# *#84666#

Try any above code.

Micromax A093 Soft Reset :-

  1. Press and hold Mobile Power button and wait until the Android phone turns off.
  2. Wait about 10 seconds.
  3. Now hold down the Power key for a short while, and wait until the mobile phone turns on.

Micromax A093 Password Recovery With Google Account:-

Method 1 : password recovery with Google security question (Unlock Screen Pattern)

To reset the Screen lock pattern or reset your password with the help of your Google security questions, you must have an active Internet connection on your android mobile. This Password reset or recovery method is only work’s on android mobile devices.

  • After number of failed attempts done on your mobile phone to unlock the device, tap Forgot pattern option ?.
  • After That, Tap Answer question.
  • Then, Type the google security answer, then tap Unlock.
  • Finally, If it’s show Yes or No options, Tap Yes if you want to create a new pattern (PIN) or Tap No if you don’t want to use a screen lock.
Читать еще:  Узкий колотый облицовочный кирпич

Method 2 :- Unlock the screen pattern with primary Google account (Gmail account)

This reset or recovery method is only work’s on Android mobile devices. You can reset or recover the password (Pattern or PIN) using your primary Google account. you must have an active Internet connection on your mobile phone to reset you password.

  • After you have entered the wrong unlock pattern number of times, wait above 40 seconds, then tap Forgot pattern ? option.
  • After that, sign in using your primary Google account means gmail account username and password.
  • Then, draw a new unlock pattern or PIN or type password, then tap Continue.
  • Finally, again draw the new unlock pattern OR PIN and tap Continue.

Important Info : If you forgot your Google (Gmail) account username and password, you can recover or reset using the Google Account Recovery official page. Follow below link.

Why need to perform Factory Reset :-

Common reasons to perform a factory reset or hard reset :

  • To fix a malfunctioning electronic device (Like mobile or tablet etc).
  • To remove a file or app or virus that is difficult to remove on your device.
  • To clear or remove the memory space on the electronic device.
  • To clear or delete the configuration and settings of the electronic device to the factory default settings.
  • To remove or delete personal information from the device before selling or giving away the device.

Note:- a factory reset or hard reset or password reset may only hide data from the Operating System (OS ), So it appears it no longer exists. This is not the same effect as data deletion or formatting(Removing), and may not therefore be wholly suitable in situations where the Electronic device changes ownership.

Как получить root права

В сфере получения root прав есть две универсальные программы, (универсальные потому что поддерживают очень много устройств), получающие root за 1 клик, это ZYKURoot 2.2 — (сайт zykuroot.info), может версия есть и более новая, это на сайте надо смотреть

Инструкции к ним в общем то и не нужны, всё как обычно, подсоединяем телефон к компьютеру и нажимаем Root. Дальше сидим и ждём что скажет программа.

How to Update Micromax Canvas Fire A093 Stock Rom v2

Hi, This is Micromax Canvas Fire A093 Stock Rom v2 by Micromax and in this guide we will know how to flash or update Micromax Canvas Fire Stock Rom v2 by easy and safest method. Micromax Canvas Fire A093 has MediaTek Quad Core 1.3 GHz processor and a 4.0 inch screen with 480 x 800 Pixels resolution. It has 512MB RAM, 4GB storage, 5 MP Rear and 0.3 MP Front Camera. True color (16 M) and 4.4.2 Android Kitkat.

In this installation guide, you will find all steps with image, therefore it is safe and easy method of flash Canvas Fire A093 Stock Rom v2.

Make some preparation of flash or update for your phone safety:

1. First of all take a backup of your phone, here is guide Click here.
2. Your phone battery should charge 80% minimum.
3. Make proper power backup of your PC or Laptop.

Download ROM and Tools of Micromax Canvas Fire A093 :

File NameDownload link
Micromax Canvas Fire A093 Stock Rom v2Download
Micromax Canvas Fire A093 SP Tool V5.1352Download
Micromax Canvas Fire A093 USB DriverDownload

Steps to install new update Micromax Canvas Fire A093 Stock Rom v2:

Step 1: Install drivers on your PC and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.

Step 2: Extract Stock ROM and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.

Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.

Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).

Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver connect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.

Читать еще:  Назовите размеры обыкновенного кирпича

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone.

After update Micromax Canvas Fire Stock Rom v2, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage by this article, then try to root your phone by this guide: How to install CWM recovery and root Micromax A093 Canvas Fire

I hope you like this Micromax Canvas Fire Stock Rom v2 installation guide from which you will be able to easily install Micromax Canvas Fire Stock Rom v2 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

Steps To Install Micromax A093 ADB Driver In Computer

Video Tutorial

Step 1: To get started, download the driver and extract it on your desktop.

Step 2: Now, open Device Manager > Action > Add legacy hardware.

Step 3: Next, click “Next” in the Add legacy hardware wizard.

Step 4: Now choose “Install the hardware that I manually select from the list (Advanced)” and click “Next“.

Step 5: Once done choose “Show all devices“, click “Next” and select the extracted file manually from your computer.

Step 6: Now to start installing your new hardware, click “Next” again.

Step 7: Click “Install” in the Windows security prompt window.

Step 8: Next, click “Finish” to complete installation.

That’s it. Now you have successfully finished installing ADB driver in your computer. If you encounter any issues while following this tutorial, do let me know via comments.

Note: If you have corrupted your Micromax A093, download Micromax A093 stock ROM and flash it on your device using an Android flash tool.

Что делать, если смартфон не включается: выявляем причину

Основные причины, по которым смартфон может перестать включаться:

  • глубокая разрядка аккумулятора;
  • сильный удар;
  • проблемы с ПО;
  • в телефон попала жидкость.

Смартфон не хочет включаться? Возможно, всё не так серьезно, как кажется, и аппарат просто разрядился. Для начала следует исключить проблему с зарядкой, и только потом искать иные возможные причины, по которым телефон перестал запускаться.

Операционные системы, такие как Android или iOS, как и любое программное обеспечение, могут внезапно перестать работать должным образом. Вполне возможно, что Ваше устройство включено, но его экран ничего не показывает, потому что ОС по какой-то причине не отвечает на команды. В такой ситуации поможет жесткий сброс, который заставит аппарат перезагрузиться и откатает его настройки до заводских.

Чтобы заново запустить выключенный аппарат, не реагирующий на нажатие кнопок, нужно разобраться, почему смартфон перестал функционировать. Если телефон не включается, причины невозможности его запуска следует выявить как можно быстрее.

Проблемы с зарядкой или разряженная батарея

Убедитесь, что зарядный разъем не поврежден и не загрязнен. Поставьте телефон на зарядку. Уже через 2-3 минуты телефон должен отреагировать на включение. Вполне возможно, что аккумулятор сильно разряжен. Для устранения проблемы потребуется заряжать телефон в течение 30 минут. Если смартфон не хочет запускаться даже после этого, возможно, произошел сбой в ПО.

Смартфоны со съемным аккумулятором

Большинство новых смартфонов имеют несъемные аккумуляторы. Если батарею из телефона можно извлечь, то выньте аккумулятор, подождите 30 секунд и верните его на место. Попробуйте зарядить аппарат.

Перезагрузка телефона (мягкий сброс)

Если на подключение к сети аппарат не реагирует, имеет смысл принудительно перезагрузить устройство. В зависимости от поставщика и операционной системы сброс осуществляется разными способами. Наиболее распространенный метод: одновременное нажатие кнопок включения и громкости (увеличение или уменьшение). Кнопки необходимо держать нажатыми в течение не менее 5-7 секунд, до включения дисплея. Если проблема с аппаратом возникла из-за некритичного сбоя в ПО, то после сброса смартфон должен запуститься без проблем.

В телефон попала вода

Если в телефон каким-то образом попала вода, или Вы пролили на него бокал пива, то устройство следует немедленно открыть и извлечь из него всё, что легко извлекается (съемный аккумулятор, слот с sim-картами). Сразу же постарайтесь просушить аппарат (к примеру, феном), но следите за температурой воздушного потока.

Если после попадания жидкости гаджет выключился и не включается, то самостоятельно решить проблему Вы уже не сможете. Следует как можно быстрее отнести телефон в мастерскую, пока вода или иная жидкость не испортили «начинку» смартфона.

Возможности Recovery

Возможности Recovery Mode отличаются в зависимости от вида. Если это официальное меню восстановления, то функциональность будет не самая высокая:

  • Перезагрузка для запуска Android в обычном режиме.
  • Установка обновлений.
  • Сброс к заводскому состоянию.
  • Очистка кэша.
  • Создание резервной копии и восстановление данных.

В кастомном меню (установленном пользователем) возможностей больше. Кроме функций официального Recovery, кастомное предлагает:

  • Установку сторонних прошивок.
  • Создание образа восстановления Андроид.
  • Очистку отдельных разделов.
  • Возвращение телефона в исходное состояние без потери данных.
  • Восстановление прав системных приложений и т.д.

Кастомные Recovery тоже бывают разными. Самыми популярными являются CWM и TWRP. При выборе следует учитывать модель телефона и желаемую функциональность. Но если вы не собираетесь устанавливать стороннюю прошивку, то можно вполне обойтись и возможностями официального Recovery.

vote
Article Rating
Ссылка на основную публикацию
ВсеИнструменты
0
Would love your thoughts, please comment.x
()
x
Adblock
detector